24_ OperatingOperating your SAMSUNG French DoorRefrigeratorusinG tHE CoLD wAtER DisPEnsERPress the ice / water button to select the type of you wantNo ICESelect this if youwant to turn icemaker off.using the ice DispenserPlace a glass underneath the ice dispenser and push gently against the dispenser lever with your glass.Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.CAution• When Cubed Ice is selected after using the Crushed Ice feature, a smallamount of residual crushed ice might be produced.• Water Dispenser InstallationAfter installation, press the dispenser arm for at least 2 minutes toremove trapped air from the water line and to fill the water system.CAutionPlease wait 2 seconds before removing the glass under the dispenser to prevent spills.If the Refrigerator door opens, the Dispenser does not work.PUSHCheck the water level2Test buttonCAution• In case ice doesn’t come out, pull out the ice bucket and press testbutton located on the right side of ice maker.• Do not press the test button continuously when the tray isfilled with ice or water as illustration.Water may overflow or ice jamming may occur.• Normal UseTo fill ice bucket to maximum capacity after installation, make sure todo the following steps.1. Allow your refrigerator to operate and cool down for 24 hours(or 1 full day).2. Waiting 24 hours will allow your ice maker to cool properly.3. Dispense 4 to 6 ice cubes into the glass.4. After 8 and 16 hours, dispense a full glass of ice at each time.Whenever all ice is used at one time, the above step 3 and4 must berepeated (before dispense the first 4 to 6 ice cubes, it needs waiting 8 hours).This will replenish the ice cubes and ensure maximum ice production.When you dump the ice from the ice bucket, you should press thedispenser lever once with ‘ICE CUBED’ or ‘CRUSHED’ functionON to get new ice faster after replacing the ice bucket in the refrigerator.CAution