English - 122. Separate the water supply line fromthe refrigerator1. Remove one or two water lines, depending onthe model, by pressing each coupler ( 1 ) andpulling the water lines ( 2 ) away.(1)(2)CAUTIONDo not cut the water line.Gently separate it from the coupler.3. Remove the freezer doorA few things to mention first.• Make sure that you lift the door straight up sothe hinges are not bent or broken.• Be careful not to pinch the water tubing andwire harness on the door.• Place doors on a protected surface to preventscratching or damage.• Is necessary, have two people disassemble thedoors.1. With the Freezer door closed, remove theupper hinge cover ( 1 ) using a screwdriver,and then disconnect the wires by gently pullingthem apart ( 2 ).(2)(1)PressingBe careful not to damage the sensorharness with the hinge cover.2. Remove the hinge bolts ( 3 ) with a 10 mmSocket Wrench.Remove the ground screw ( 4 ) by turning itcounter-clockwise.Take off the upper hinge ( 5 ) in the direction ofthe arrow.Take care that the door does not fall on you.(4)(3)(5)3. Open the Freezer door, and then remove thedoor from the lower hinge ( 6 ) by carefully liftingit up ( 7 ).(7)(6)DA68-02981J-00.indb 12 14. 11. 6. �� 2:05