Samsung RH25H5611SR User Manual

Also see for RH25H5611 Series: User manual User manual User manual

English - 161. Open the door that needs to be adjusted andloosen the clamping nut ( A ) at the bottom ofthe door by turning it clockwise ( ) usingthe spanner included in the product package.(Raise the lower of the two doors first.)A2. Adjust the height of the door by turning theadjustment nut ( B ) counterclockwise ( )with a spanner.(Turn it counterclockwise ( ) to increasethe height of the door and clockwise ( ) todecrease it.)- Open the door and adjust it from the inside.B3. Once the doors are level, turn the clamping nut( A ) counterclockwise ( ) to tighten it.AAdjusting the level when the refrigeratoris empty can result in the refrigeratorbecoming uneven again once items havebeen placed inside.If this occurs, adjust the level again.WHEN THE FREEZER DOOR ISLOWER THAN FRIDGE DOORA level refrigerator is necessary for getting thedoors perfectly even.Make sure your refrigerator is level before youbegin.If you need help leveling, review the previoussection on leveling the refrigerator.Freezer door is lower than Fridge doorThe process for adjusting each door is the same.Open the doors and adjust them, one at a time, asfollows:1. Unscrew the nut ( 1 ) from the lower hinge untilit reaches the upper end of the bolt ( 2 ).(2) Bolt(1) Nut(3) WrenchWhen you release the nut ( 1 ), make surethat you use the hex wrench provided( 3 ) to loosen the bolt ( 2 ) in a counter-clockwise ( ) direction.You should then be able to unscrew thenut ( 1 ) with your fingers.DA68-02981J-00.indb 16 14. 11. 6. �� 2:05