Samsung RL37SGPS Instruction Manual

Also see for RL34EC series: Instruction manual

Contents

3Safety PrecautionsDo not use inflammable aerosols such as spray paint anddope near the refrigerator. Otherwise, there will be a riskof explosion.Do not let children hang on the doors or climb therefrigerator to avoid damaging the refrigerator andinjuring the children.Do not store corrosive, inflammable and explosive, strongacid or alkali substances such as butane, ether, vitriol,benzene, and alcohol. Bottles containing liquid foods alsoshall not be stored in the freezer; otherwise the bottles maybe broken.If the appliance is disconnected from the power supply, youshould wait for at least five minutes before reconnecting thepower to avoid damaging the compressor.: If the flexible power cord is damaged, it must berepaired by special tools. Thus, it must be replacedby the repair store appointed by the manufacturer.If the refrigerator can not work normally or is damaged, donot continue using it. Pull out the power plug and contact thelocal service center immediately. If the power cord isdamaged, to avoid any accident, it must be replaced byservice agent of the manufacturer or a qualified staff.Do not splash water on the top or back of the refrigerator toavoid reducing the insulation effects of the appliance.If you wish to dispose of the refrigerator, please firstremove the door seals.When the appliance is disposed of, it shall be handled byprofessional staff instead of being discarded casually;otherwise it may cause hazards or other dangers to theenvironment.CAUTIONChanging the direction of the door opening(RL34SC*,RL37SC*)14Simply Type:1. Take down HINGE UPP and SHAFT-HINGE and install them at the opposite side of theHING-UPP. Take down COVER DOOR UPP and fridge door.2. Take down SCREW A, SCREW E and MID HINGE, and then the refrigerator door. Take downCAP HINGE HOLE, CAP SCREW CABI and SCREW F. Then fix them at right.3. Gently incline the appliance in less than 45 degree, remove the right side FOOT, and unfastenthe SCREW D. Take down HINGE LOW, FIXER HINGE LOW , andSTOPPER HINGE LOW. Reverse and fix STOPPER HINGE LOW with FIXER HINGE LOW tothe left of HINGE LOW and .4. Take down left FOOT and unfasten SCREW D. Take down and fix REINF to the right.Then install FOOT.5. Take down SCREW G and STOPPER DOOR in the fridge and freezer doors and install them atthe left of the doors. Take down CAP HOLE DOOR and CAP SPACER DOOR and fix them atthe left of the doors,6.SHIFT HINGESHIFT HINGEFix MID HINGE with SCREW A and SCREW E, and install the freezer door Fix HINGE-LOW tothe left and install FOOT.Put the refrigerator stable and install the fridge door.Fix HINGE UPP with SCREW A.7SCREW ASHAFT HINGEMID HINGESCREW ASCREW EREINFSCREW HEX(SCREW D)FOOT SCREW HEXSCREW DHINGE LOWSHAFT HINGESTOPPER HINGE LOWCAP SCREW CABISCREW FCAP HINGE HOLECAP HINGE HOLECAP SPACER DOORCOVER DOOR UPPSTOPPER DOORSCREW GCOVER TOP FRONTHINGE UPPFIXER HINGE LOWFOOTSTOPPER DOORSCREW G