Samsung RS22HDHPNSR User Manual

Also see for RS22HDHPNSR: Quick guide User manual

English - 20Operating the SAMSUNG side-by-side refrigerator( 5 )FridgePress the Fridge button to set the Fridgetemperature.You can set temperature between 44 °F(7 °C) and 34 °F (1 °C).The Power Cool function starts operatingwhen you set the temperature lower than34 °F (1 °C).If you select “Power Cool”, the insidetemperature of the Fridge will decrease forabout two and a half hours.When the Power Cool mode exits, thenotch is reset to the factory defaulttemperature.( 6 )Ice Off/ ChildLock(3sec)1. Press the Ice Off button to turn the icemaking function off.2. Press and hold this button for 3seconds, to turn on the Chid lock andlock all the panel buttons, including theIce button and the dispensers.To cancel this function, press and holdthis button for 3 seconds again.( 7 )IcePress the Ice button to choose cubed orcrushed ice.( 8 )Water Press the Water button for water.USING THE DIGITAL DISPLAY“ Freezer Temp.” indicates the current Freezertemperature.“ Fridge Temp.” indicates the current Fridgetemperature.When not in use, the Display will turn off.This is normal operation.USING THE CONTROL PANEL /DIGITAL DISPLAY(1)(2)(3)(4)(5)(6)(7) (8)( 1 )PowerFreeze /Override(3sec)1. Press the Power Freeze button todecrease the time needed to freezeproducts in the Freezer.This can be helpful if you need toquickly freeze items that spoil easilyor if the temperature in the freezer haswarmed dramatically.(For example, if the door was left open).2. The Override function activates/deactivates Smart Grid (page 25).Press the Power Freezer/Overridebutton for 3 seconds to set/clear theOverride function.( 2 )FreezerPress the Freezer button to set the freezertemperature.You can set the temperature between 5 °F(-15 °C) and -8 °F (-23 °C).( 3 )EnergySaver /ResetFilter(3sec)1. For better energy efficiency, press theEnergy Saver button.If condensation occurs on the doors,press again to turn the Energy SaverButton function off.2. When you change the water filter, pressand hold this button for 3 seconds toreset the water filter indicator.( 4 )Lighting/ °C↔°F(3sec)1. Press the Lighting button to turn on thedispenser LED lamp.2. To switch the temperature unitsbetween ºC and ºF, press and hold thisbutton for 3 seconds.Each time you press and hold the buttonfor 3 seconds, the ºC and ºF temperaturemodes alternate and the ºC or ºF iconlights up, indicating your selection.DA68-02966A-00.indb 20 2013. 12. 10. �� 2:44