14_ setting upsetting up your side-by-side refrigeratorsetting uP the refrigerator(Cont’D)If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.Tools you will needRemoving the Front Leg CoverFirst, open both the freezer and refrigerator doors, and then take off the front leg cover by turning thethree screws counter-clockwise.Separating the water supply line from the refrigerator1. Remove the water tube by pressing the coupler 2 and pulling the water tube 1 away.Reattaching the water supply line1. While pressing the front face of coupler2 , insert the water line 1 in the coupler.Carefully place front cover and push tosnap it into position.2. Insert 1 clip in plastic bac and check that itholds the line firmlyThe water line must be fully inserted tothe marked line to prevent water leakage from the dispenser.Do not cut the water line. Gently separate it from the coupler.12front Leg CoVersCrewPhilips Screwdriver Flat-blade Screwdriver 10mm Socket Wrench1 2Line LineCoupler CouplerCouplerClip a (1/4”)