Samsung RS26DDA series User Manual

Also see for RS26DDA Series: User manual

14_setting upRemoving the freezer doorMake sure that you lift the door straight up so the hinges are not bent or broken.Be careful not to pinch the water tubing and wire harness on the door.Place doors on a protected surface to prevent scratching or damage.With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, and thendisconnect the wires 2 .Remove hinge bolts 3 with a 10mm Socket Wrench and a ground screw 4 counter-clockwise,5 in the direction of the arrow. Be careful when removing the doorto ensure that it does not fall on you.Open the Freezer door before lifting it up. Remove the door from the lower hinge 6 by carefullylifting the door 7 .Remove the lower hinge 8 from the lower hinge bracket 9 by lifting the lower hinge in thedirection of the arrow.Make sure to put the water line through the lower hinge before assembling it.Reattaching the freezer doorsTo reattach the freezer doors, replace parts in reverse order.CAUTIONCAUTION218945376Is necesary two people for desassembling doors.Be careful, no damage sensor harness with cover hinge.Before remove tho bolts, disassembling Cover Leg front and hoses.Pressing