Samsung RS68N8941SL/EU User Manual

Also see for RS6 N Series: User manual

English 37InstallationTo connect the water filtering hose to the water lineaaaAB03A. Water Line from unitB. Water Line from Kit1. Loosen and remove the compressionnut (a) from the water line of therefrigerator, and insert it to the waterfiltering hose.2. Tighten up the compression nut (a) toconnect the water filtering hose and thewater line.3. Open the main water valve and checkfor any leaks.4. If there are no leaks, dispense about 10litres of water or dispense the water for6 - 7 minutes before actually using therefrigerator to remove impurities insidethe water filtering system.5. Secure the water line to a sink or a wallusing a clip.CAUTION• Do not tighten the water lineexcessively. Make sure the water line isnot bent, pinched, or squashed.• Do not mount the water line on anypart of the refrigerator. This maydamage the refrigerator.NOTEIf you have to relocate the refrigeratorafter connecting the water line, make surethe joined section of the water line must isstraight.To repair the water lineCAUTIONThe water line must be repaired by a qualified professional. If you encounter a water leak,contact a local Samsung service centre or the installer of the water line.Untitled-38 37 2018-06-08 2:16:51