Samsung RS68N8941SL/EU User Manual

Also see for RS6 N Series: User manual

InstallationEnglish38InstallationReverse osmosis water filtration systemThe water pressure of the water supply system to a reverse osmosis water filtrationsystem must be between 241 kPa and 827 kPa.The water pressure of the reverse osmosis water filtration system to the refrigerator’scold water line must be at least 276 kPa. If the water pressure is below the specified:• Check if the sediment filter in the reverse osmosis system is blocked. Replace the filterif necessary.• Refill the water tank in the reverse osmosis system with water.• If your refrigerator has a water filter, it may further reduce the water pressure whenused in conjunction with a reverse osmosis system. Remove the water filter.For more information or servicing, contact a licensed plumbing professional.Ordering a new filterTo purchase a new water filter (part type: HAFEX/EXP), contact a local Samsung servicecentre.To mount the water filter into place1. Attach the lock clips (x2) to appropriatepositions under the sink, for instance.Then, fix the lock clips firmly usingscrews.2. Insert the water filter into the upperand lower clips in the correct direction.Make sure to check the verticaldirection of the water filter.NOTEIf the filter is installed horizontally, watermay remain in the filter. Therefore, verticalinstallation is recommended.CAUTIONDo not mount the water filter on any partof the refrigerator. This may damage therefrigerator.Untitled-38 38 2018-06-08 2:16:51