Samsung RS6HA Series User Manual

Also see for RS6HA Series: User manual User manual

English 37InstallationCAUTIONWhen adjusting the length of the waterline tubing, make sure to smooth out thecut surface at a right angle. This is toprevent a water leak.NOTE• A newly installed filter may cause the water dispenser to spurt water briefly. This isbecause air has entered the water line.• This replacement process may involve the refrigerator to drip water onto the floor. Ifthis happens, wipe up with dry cloths.STEP 8 Initial settingsBy completing the following steps, the refrigerator should be fully functioning.1. Plug the power cord into the wall socket to turn the refrigerator on.2. Open the door, and check if the interior light lights up.3. Set the temperature to the coldest, and wait for about an hour. Then, the freezer will beslightly chilled, and the motor will run smoothly.4. Wait until the refrigerator reaches the set temperature. Now the refrigerator is readyfor use.STEP 9 Final checkWhen installation is complete, confirm that:• The refrigerator is plugged into an electrical outlet and grounded properly.• The refrigerator is installed on a flat, level surface with a reasonable clearance from thewall or the cabinet.• The refrigerator is level and is sitting firmly on the floor.• The door opens and closes freely, and the interior light turns on automatically whenyou open the door.Untitled-8 37 2021-05-27 3:16:02