Samsung RS7 Series User Manual

Also see for RS54H Series: User manual User manual Quick start guide User manual User manual

Contents

Samsung RS7 Series User Manual Manual pdf 19 page image

English - 1901 SETTING UPLEVELLING THE REFRIGERATORNow that the doors are back on the refrigerator, youwill want to make sure the refrigerator is level so youcan then make final adjustments. If the refrigeratoris not level, it will not be possible to get the doorsperfectly even.The front of the refrigerator is also adjustable.When the Freezer door is lower thanthe fridgeInsert a flat-blade screwdriver into a notch on theLeg, turn it clockwise or counter clockwise to levelthe freezer.When the Freezer door is higher thanthe fridgeInsert a flat-blade screwdriver into a notch on theLeg, turn it clockwise or counter clockwise to levelthe fridge.Refer to the next section for the best way tomake very minor adjustments to the doors.MAKING MINOR ADJUSTMENTSTO THE DOORSRemember, a level refrigerator is necessary for gettingthe doors perfectly even. If you need help, review theprevious section on levelling the refrigerator.In the process for adjusting both the doors is thesame. Open the doors and adjust them, one at atime, as follows:1. Unscrew thenut 1 from thelower hinge untilit reaches theupper end of thebolt 2 .When you release the nut 1 , make sure thatyou use the Allen wrench provided 3 to loosenthe bolt 2 in a counter-clockwise direction.You should then be able to unscrew the nut 1with your fingers.2. Adjust theheight differencebetween thedoors by turningthe bolt 2clockwiseor counter clockwise .When you turn clockwise , the door willmove up.3. After adjustingthe doors, turnthe nut 1clockwiseuntil it reachesthe lower endof the bolt, thentighten the bolt again with the wrench 3 to fi xthe nut in place 1 .If you do not secure the nut firmly, the bolt mayrelease.LegScrew DriverScrew DriverLegAdjustmentpartWhen the door of the freezeris higher than the fridge321WrenchBoltNut32WrenchBolt321WrenchBoltNut