setting up _11setting up your side-by-siderefrigerator2. Removing the freezer doorA few things to mention first.• Make sure that you lift the door straight up so the hinges are not bent or broken.• Be careful not to pinch the water tubing and wire harness on the door.• Place doors on a protected surface to prevent scratching or damage.1. With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, andthen disconnect the wires by gently pulling them apart .. Remove hinge screws and the ground screw by turning counter-clockwise, and takeoff the upper hinge . Be careful that the door does not fall on you as you are removing it. Next, remove the door from the lower hinge by carefully lifting the door straight up .101 sEtting uPBe careful not to pinchthe water tubing andwire harness on thedoor.