0_ setting upConnect the water line to the refrigerator.- Remove the compressor cover of the refrigerator.- Connect the water line to the valve, as shown in thefigure.- When connected, check if there is any leakage.If any, repeat the connection.- Reattach the compressor cover of the refrigerator.Secure the water line.- Using clip ”A”, fix the water line to the wall (the back ofrefrigerator).- When the water line is secure, make sure whether the water lineis not excessively bent, pinched or squashed.CLIP AWATER LINEWATER LINEINSTRUCTIONSCOMPRESSOR COVER OFREFRIGERATORCONNECTION NUT
