Samsung RSG257AA User Manual

Also see for RSG257AA Series: Quick start guide Specifications User manual User manual

20_ OperatingIce OffThis icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be produced.When ICE OFF blinks on the display panel, reinsert the bucket and/or make sure it’s installed properly.Child LockThis icon will light up when you activate the “Lock” feature. In this case, you won’t be able to use thecontrol panel. If you press and hold the Ice Off/Hold 3 sec for Child Lock Button you will be able touse the control panel again.Canceling Cooling Off Mode (“OF & OF” code on the display)This function is for store display. It is not for customer use.In case of Cooling Off Mode, It seems working but doesn’t make cool air. To cancel thismode, press the Power Freeze and Freezer buttons at the same time for 3 secondsuntil “Ding-dong” sounds.ContRoLLinG thE tEMPERAtuREBasic Temperature of Freezer and FridgeThe basic and recommended temperature of Freezer and Fridge compartments are -4ºF/38ºF.If the temperature of Freezer and Fridge compartments are too high or low, adjust the temperaturemanually.Controlling the Freezer temperatureThe freezer temperature can be set between 8ºF and -14ºF to suit your particular needs. Press theFreezer button repeatedly until the desired temperature is shown in the temperature display. Keep inmind that foods like ice cream may melt at 4ºF.The temperature display will move sequentially from 8ºF and -14ºF. When the display reaches 8ºF, itwill begin again at -14ºF.Five seconds after the new temperature is set the display will again show the actual current freezertemperature. However, this number will change as the Freezer adjusts to the new temperature.Controlling the Fridge temperatureThe refrigerator temperature can be set between 46ºF and 34ºF to suit your particular needs. Pressthe Fridge button repeatedly until the desired temperature is shown in the temperature display.The temperature control process for the Fridge works just like the Freezer process.Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begintracking towards the newly set temperature. This will be reflected in the digital display.- The temperature of the freezer or the refrigerator may rise from opening the doors toofrequently, or if a large amount of warm or hot food is placed in either side.- This may cause the digital display to blink. Once the freezer and refrigerator return to theirnormal set temperatures the blinking will stop.- If the blinking continues, you may need to “reset” the refrigerator. Try unplugging theappliance, wait about 10 minutes and then plug back in.CAUTIONCooling OffmodeDA99-01746A(EN)-GGH.indd 20 2008.7.10 12:12:52 PM