Samsung RSG307 SERIES User Manual

Also see for RSG307 SERIES: Quick start guide User manual User manual User manual

08_ setting upRemoving the Fridge Door1. Remove a screw on the upper hinge cover 1 .With the door open, disengage the two lockingtabs with a fl at-head screw driver 2 and removeit while the lifting up the rear of the cover 3 , andthen disconnect the wires by gently pulling themapart 4 .2. Removing the FIXER HINGE ,and next take off theupper hinge. Be careful that the door does not fallon you as you are removing it.Be sure to keep track of all parts you areremoving.3. Remove the door from thelower hinge 5 by lifting thedoor straight up 6 .Reattaching the Fridge doorTo reattach the fridge doors, replace parts inreverse order.LEVELLING THE REFRIGERATORNow that the doors are back on the refrigerator, youwant to make sure the refrigerator is level so that youcan make fi nal adjustments. If the refrigerator is notlevel, it will not be possible to get the doors perfectlyeven.When the Freezer part is lower than the Fridgepart.Insert a fl at-blade screwdriver into a slot on theFreezer Leg, then turn it clockwise.When the Fridge part is lower than the Freezerpart.Insert a fl at-blade screwdriver into a slot on the FridgeLeg, then turn it clockwise.Refer to the next section for the best way tomake very minor adjustments to the doors.MAKING MINOR ADJUSTMENTS TOTHE DOORSRemember, a level refrigerator is necessary for gettingthe doors perfectly even. If you need help, review theprevious section on levelling the refrigerator.When the door of the fridge is higher than thefreezerInsert a fl at-blade screwdriver into a slot on the freezerleg, then turn it clockwise.65Freezer LegFreezer LegScrew DriverScrew DriverFridge LegFridge Leg Screw DriverScrew Driver3241