Samsung RSG307 Series User Manual

Also see for RSG307 SERIES: Quick start guide User manual User manual User manual

Contents

English - 083. Next, remove the door from the lower hinge (5)by carefully lifting the door straight up (6).65Be careful not to pinch the water tubingand wire harness on the door.Reattaching the freezer doorsTo reattach the freezer doors, replace parts inreverse orderReattaching the Water Supply Line1. The Water Line must be fully Inserted to thecenter of transparent coupler to prevent waterleakage from the dispenser.2. Insert the 2 clips in the install pack and checkthat each clip holds the line firmly.Center of transparent couplerCenter of transparent couplerclip A (¼”)clip A (¼”)(6.35mm)(6.35mm)Do not cut the water line. Gently separateit from the coupler.Removing the Fridge Door1. Remove a screw on the upper hinge cover (1).With the door open, disengage the two lockingtabs with a flat-head screw driver (2) andremove it while the lifting up the rear of thecover (3), and then disconnect the wires bygently pulling them apart (4).32412. Removing the FIXER HINGE ,and next take offthe upper hinge. Be careful that the door doesnot fall on you as you are removing it.Be sure to keep track of all parts you areremoving.3. Remove the doorfrom the lower hinge(5) by lifting the doorstraight up (6).65Reattaching the Fridge doorTo reattach the fridge doors, replace partsin reverse order.LEVELLING THEREFRIGERATORNow that the doors are back on the refrigerator,you want to make sure the refrigerator is levelso that you can make fi nal adjustments. If therefrigerator is not level, it will not be possible to getthe doors perfectly even.When the Freezer part is lower thanthe Fridge part.Insert a fl at-blade screwdriver into a slot on theFreezer Leg, then turn it clockwise.Freezer LegFreezer LegScrew DriverScrew DriverDA68-02500A-11.indb 08DA68-02500A-11.indb 08 2013. 12. 2. 9:482013. 12. 2. 9:48