setting up _901 SETTING UPRemoving the Fridge Door1. With the door closed, remove the upper hingecover 1 using a screwdriver.2. Remove hinge screws 2 and the ground screw3 by turning counter-clockwise, and take off theupper hinge 4 . Be careful that the door does notfall on you as you are removing it3. Remove the door from the lower hinge 5 bylifting the door straight up 6 .4. Remove the lower hinge 7 from the bracket 8by gently lifting the lower hinge upwards.REATTACHING THEREFRIGERATOR DOORSOnce you have safely placed your refrigerator whereyou plan for it to stay, it is time to put the doors backon.Reattaching the Freezer Door1. Replace the freezer door by inserting the waterline 1 back into the lower corner of the door andthen into the hole on the lower hinge 2 .Gently pull the water line back down so that it runsstraight, with no kinks or bends.2. Insert the upper hinge shaft 3 into the hole onthe corner of the freezer door 4 .Make sure the hinge is level between the upperhinge hole 5 and the hole of the cabinet 6 andreattach the hinge screws 7 and ground screw8 by turning in a clockwise direction.Reconnect the wires.3. Place the front part of the upper hinge cover 9on the front of the upper hinge 10 and reattachwith the screw.423110945678312