158 Section 3B. Web and DataTo change your Net Guard settings: Select and press > Settings > More... >Data > Net Guard. Select On to activate the Net Guard. Select Off to deactivate the Net Guard.Data Connection Status and IndicatorsYour phone displays the current status of your dataconnection through indicators at the top of the screen.The following symbols are used:Your data connection is active (data is beingtransferred); the transmit/receive symbol will blinkto indicate data transmission. During data usage,you can receive incoming voice calls or SMSmessages; outgoing voice calls can be made, butthe data services connection will terminate.Your data connection is dormant (no data isbeing sent or received). Though not currentlyactive, when dormant the phone can restart anactive connection quickly; voice calls can bemade and received.If no indicator is displayed, your phone does not have acurrent data connection. To launch a connection, see“Launching a Data Connection” on page 157.Navigating the WebNavigating through menus and Web sites during adata session is easy once you’ve learned a few basics.Here are some tips for getting around:SoftkeysDuring a data session, the bottom line of your phone’sdisplay contains one or more softkeys. These keys areshortcut controls for navigating around the Web, andthey correspond to the softkeys directly below thephone’s display screen.Depending on which orientation you are using (portraitor landscape) the left and right softkey functions areassigned to one of the two sets of softkeys.Note When enabled, the Net Guard appears only once aslong as you have not turned the phone off and on.Sprint M540.book Page 158 Wednesday, August 27, 2008 10:00 PM
