setting up _1712 3Sticker(month indicator)101 sEtting uPsetting up your side-by-siderefrigeratorinstaLLing thE watEr DisPEnsEr LinE (oPtionaL)Connecting the water line to the refrigerator1. Remove the cap from water line on the unit and insert compression nut to the water line onthe unit after disassembling from provided water line.2. Connect both water line from the unit and water line in the kit3. Tighten the compression nut onto the compression fitting. Be careful no gap between two items.4. Turn water on and check for any leakage.Only connect the water line to a drinkable water source.If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing tomake sure you get a snug, leak-free connection.Before being used, the leakage in these places should be examined• Samsung Warranty does not cover WATER LINE INSTALLATION.• It’ll be done at customer’scharge unless the retail priceincludes installation cost.• Please contact Plumber orAuthorized Installer for theinstallation if needed.• If Water leakage occurs due toimproper installation, Please contact installer.Installing the water filter.Before installing the water filter, pleaseremove the top shelf.1. Remove the water filter cover( 1 )2. Remove the fixed cap by turning it counterclockwise. Keep the cap in a safe place for lateruse if you don’t use a filter.3. Remove the water filter from the box and puta replacement indicator sticker on the filter asshown. Place a sticker on the filter that datessix months in the future. For example, if youinstall the water filter in March, put the “SEP”sticker on the filter to remind you to replace inSeptember. That way you’ll know when it istime to replace the filter. Normally, a filter life isabout 6 months.removecapWater linefrom unitWater linefrom Kitno gaploosen aCAUTION