62_ operating1. Touch the button in the bottom right corner of the Settings list.2. Touch Wi-Fi Networks in the Settings list.3. Choose the wireless AP you want to connect to.• : Locked with Security Code• : Signal Strength• You can check the MAC address of the Fridge on thebottom of the Screen.• If there are no APs showing on the screen, touch the Search button, and then select the Searchmenu at the bottom.• Depending on the wireless AP type, the refrigerator may not make a connection.We recommended you use a wireless AP that supports IEEE 802.11 b/g.• If you don't have a wireless router, please contact your internet provider or purchase and install oneyourself.• If you can’t remember the name of your wireless network system (SSID) or its security code, pleasesee the user manual of your router.• Radio frequency signals can interfere with any the wireless network system and they may affect thenetwork performance of your refrigerator.• Obstacles such as concrete walls and metallic doors and radio and microwave interference fromdevices such as microwave ovens can affect the operation of your wireless network system.• Depending on the type and location of your wireless network system and the surroundingenvironment, the range and quality of your wireless network may vary.4. If your wireless network has a security code enter thesecurity code, and then select the OK button.In most cases, after you have entered the securitycode, the refrigerator acquires the Network addressesit needs (IP Address, Subnet Mask, Gateway, and DNS)to connect to the network. If it does not or you need toenter these values manually, go to Step 6.DA68-02520A(0.4).indb 62 2011.6.8 8:41:37 AM