08_ setting up3. Remove the 3 hex head bolts ( 7 ) attached tothe upper left and right door hinges with a socketwrench (10mm).Remove the ground screw ( 8 ) attached to theupper left and right door hinges with a philipsscrewdriver (+). Remove the upper left and rightdoor hinges ( 9 ).4. Lift the door straight up to remove.5. Remove the screw ( 10 ) attached to the lower leftand right door hinges with a philips screwdriver (+).Remove the 2 hex head bolts ( 11 ) attached tothe lower left and right door hinges with an allenwrench (3/16”). Remove the lower left and rightdoor hinges ( 12 ).REATTAcHING THE REFRIGERATORDOORSTo reattach the fridge doors after you have moved thefridge to its final location, assemble parts in reverseorder.DISASSEMBLE THE FLEx DOOR1. Take out the Flex Zone ( 1 ) by lifting it up.2. Take off the cover ( 2 ) w/harness with a flat-bladescrewdriver (-).3. Press the locking tab and separate the WireConnector.When reassembling it, be sure to connect thewire harness.If it is not connected, the Flex Room does notwork.4. Remove 2 hex head bolts from the sides with asocket wrench (10mm).5. Lift up the Flex door from the rails.Allen wrench121011Socket wrench78912cAuTIONDA68-02520A(0.4).indb 8 2011.6.8 8:40:1 AM