setting up _1101 SETTING UPConnect the water line to the fridge• Connect the plastic line on the back of your fridge to thecartridge holder outlet (fully insert the plastic line to thecartridge holder outlet).• Insert plastic clip to the cartridge holder inlet and outlet.• Turn water on and check for any leakage.• You can purchase the necessary filter cartridge at theretailer where you purchased this refrigerator. Make sureyou buy the SAMSUNG filter cartridge (Replacementcartridge No : DA29-00015A) to ensure the bestperformance.• Water line must be connected to drinkable water only• A compression fitting and nut kit is supplied with the unit and it is inside the fridge drawer.• When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line(Icemaker supply line)CartridgeHolderClipFilter cartridgePlastic line(Provided)To use without the water filter1. Cold Water line2. Pipe Clamp.3. Plastic line4. Compression Nut5. Compression Sleeve6. Packing Nut.7. Shut Off ValveConnecting to the water supply line• Shut off the main water supply line and turn the Icemaker to the off position.• Locate the nearest cold water drinking line.1. First, shut off the main water supply line.2. Locate the nearest cold, drinking water line.3. Follow the Water line Installation Instructions in theinstallation kit.The water line must be connected tothe cold water pipe. If it is connectedto the hot water pipe, it may causethe purifier to malfunction.CAUTIONClose MainWater pipeClose MainWater pipe NO GAP4. After connecting the water supply to the water filter, turn your main water supply back on anddispense about 3L to clear and prime the water filter.