Cap01 SETTING UPsetting up _1CapReplace the freezer door on the leftside bottom hinge. Replace the leftside middle hinge. You can get it fromthe installation tool (box) supplied withyour new Samsung refrigerator. Andreattach it by using 1 screw and 2 bolts.(Should use screwdriver(+) for screwand wrench for bolts.) Cover the middle hinge cap.Remove 1 cap and 3 screws on the left sideof the refrigerator where you will reattachthe left side middle hinge. (Refer to the leftpicture.) And replace them on the formerright side middle hinge position like the rightpicture. When removing 2 plastic screws,pick them up with tweezers (forceps,nippers, pliers) while turning them withscrewdriver(+).Remove 2 bolts of each hinge andremove both right and left side bottomhinges.Separate low hinge shaft by using 5/32wrench and disassemble low hingeleg by turning it colockwise, and thenassemble the low hinge by turning itover.Separate the cap of the front left legside of the Cover and insert it on thefront right leg side of the Cover.Reattach the former right hinge on theleft side and the former left hinge on theright side by using 2bolts.Separate stopper by removing 1 screwon the right lower side of freezer andassemble the stopper on the left side byreversing it. Replace the bottom hinge cap cover. 11 10