setting up _0901 SETTING UPRemoving the Fridge DoorWith the door closed, remove the upper hinge1.cover 1 using a screwdriver.Remove hinge screws2. 2 and the groundscrew 3 by turning counter-clockwise, andtake off the upper hinge 4 . Be careful that thedoor does not fall on you as you are removing itRemove the door from the lower hinge3. 5 bylifting the door straight up 6 .Remove the lower hinge4. 7 from the bracket8 by gently lifting the lower hinge upwards.REATTACHING THEREFRIGERATOR DOORSOnce you have safely placed your refrigeratorwhere you plan for it to stay, it is time to put thedoors back on.Reattaching the Freezer DoorReplace the freezer door by inserting the water1.line 1 back into the lower corner of the doorand then into the hole on the lower hinge 2 .Gently pull the water line back down so that itruns straight, with no kinks or bends.Insert the upper hinge shaft2. 3 into the hole onthe corner of the freezer door 4 .Make sure the hinge is level between the upperhinge hole 5 and the hole of the cabinet 6and reattach the hinge screws 7 and groundscrew 8 by turning in a clockwise direction.Reconnect the wires.Place the front part of the upper hinge cover3. 9on the front of the upper hinge 10 and reattachwith the screw.423110945678312