Safety information _3compatibility that is, however, also combustible.When transporting and installing the appliance,care should be taken to ensure that no parts ofthe refrigerating circuit are damaged.SEvERE WARNING SIGNSFOR INSTAllATION• Do not install this appliance in a humid, oilyor dusty location, in a location exposed todirect sunlight and water (rain drops).- Deteriorated insulation of electrical parts maycause an electric shock or fire.• Do not place this refrigerator in direct sunlight orexpose to the heat from stoves, room heaters orother appliances.• Do not plug several appliances into the samemultiple power board.The refrigerator should always be plugged intoits own individual electrical outlet which has avoltage rating that matched the rating plate.- This provides the best performance and alsoprevents overloading house wiring circuits, whichcould cause a fire hazard from overheated wires.If the wall socket is loose, do not insert thepower plug.- There is a risk of electric shock or fire.• Do not use a cord that shows cracks or abrasiondamage along its length or at either end.• Do not bend the power cord excessively orplace heavy articles on it.• Do not use aerosols near the refrigerator.- Aerosols used near the refrigerator may causean explosion or fire.• Do not install this appliance in a location wheregas may leak.- This may result in an electric shock or fire.• The installation or any service of thisappliance is recommended by a qualifiedtechnician or service company.- Failing to do so may result in an electric shock,fire, explosion, problems with the product, orinjury.• This refrigerator must be properly installed andlocated in accordance with the manual before itis used.• Connect the power plug in proper position withthe cord hanging down.- If you connect the power plug upside down, wirecan get cut off and a cause fire or an electric shock.• Make sure that the power plug is not squashedor damaged by the back of the refrigerator.• When moving the refrigerator, be careful not toroll over or damage the power cord.- This constitutes a fire hazard.• The appliance must be positioned so that theplug is accessible after installation.• The refrigerator must be grounded.- You must ground the refrigerator to- prevent any power leakages or electric shockscaused by current leakage from the refrigerator.• Never use gas pipes, telephone lines or otherpotential lightening rods as ground.- Improper use of the ground plug can result in anelectric shock.• If the power cord is damaged, have itreplaced immediately by the manufactureror its service agent.• The fuse on the refrigerator must be changed bya qualified technician or service company.- Failing to do so may result in an electric shock orpersonal injury.cAuTION SIGNS FORINSTAllATION• Keep ventilation opening in the applianceenclosure or mounting structure clear ofobstruction.• Allow the appliance to stand for 2 hours afterinstallation.SEvERE WARNING SIGNSFOR uSING• Do not insert the power plug with wet hands.• Do not store articles on the top of theappliance.- When you open or close the door, the articlesmay fall and cause a personal injury and/ormaterial damage.• Do not put items filled with water on therefrigerator.- If spilled, there is a risk of fire or electric shock.• Do not let children hang on the door.- Failure to do so may cause serious personal injury.• Do not leave the doors of the refrigerator openwhile the refrigerator is unattended and do notlet children enter inside the refrigerator.• Do not allow babies or children go inside thedrawer.- It can cause death from suffocation byentrapment or personal injury.• Do not sit on the Freezer door.- The door may be broken and cause a personalinjury.WARNINGcAuTIONWARNING