60 2B. Settings3. Touch and drag the onscreen slider, adjust thevolume level, and tap OK. Within Volume, touch Use incoming call volume fornotifications to match notification volume to thecurrent call ringtone volume.VibrateTo set your device to vibrate for incoming calls and silentfor notifications: Press the volume button down in standby modeuntil you see on the screen.To set your device to always vibrate for incoming calls:1. Press > and tap > Sound >Vibrate.2. Tap a feature to enable it. A green light indicatesthe feature is enabled: Always: your device vibrates for all incoming callsand notifications. Never: your device uses sound only for allnotifications and alerts. Only in silent mode: your device vibrates fornotifications and alerts when Silent mode isactive. Only when not in Silent mode: your device onlyvibrates for notifications and alerts when Silentmode is not active.To set your device to vibrate while using the dialpad:1. Press > and tap > Sound.2. Tap Haptic feedback. (If you have already checkedthe option, tapping it again deselects the option.)Silence AllThe Silence All option allows you to mute all soundswithout turning your device off (except for Mediavolume).To activate Silence All: Press and hold the volume button down in standbymode until you see on the screen.Tip: You can adjust the ringer volume in standby mode (orthe earpiece volume during a call) by pressing thevolume button on the left side of your device.
