106 2F. Voice ServicesAvailable ASR commands include: Call to call an entry in your Contactslist or a spoken phone number. (See “Making aVoice Call With Voice Dialer” on page 106.) Dial to call an entry in your Contactslist or a spoken phone number. Redial to callback an entry in yourContacts list or a spoken phone number. Open applications. (See “Opening Menus With VoiceDialer” on page 107.)Making a Voice Call With Voice Dialer1. Press and tap > (Voice Dialer).– or –Press and hold the voice dialer key ( )located on the side of the device.2. When you see “Listening,” say “Call” followed bythe name and the label for the phone number youwish to call. For example, say “Call John SmithMobile.” The device dials the number stored for thecontact “John Smith” with the label “Mobile.” You can also touch the onscreen Call #> field to activate the function. If the location is not recognized or the name doesnot have a phone number stored in Contacts,your phone will an onscreen list of possibleoptions. If a name has only a single number, or if youknow the name but are not sure which number tocall, say “Call” followed by the name only. Forexample, say “Call John.” If the name isrecognized and there is only one phone numberfor the name, your device immediately places thecall.Tip: Use Voice Dialer in a quiet environment so it canaccurately recognize your commands.M580.book Page 106 Wednesday, September 21, 2011 4:52 PM
