116 2H. CameraPress and tap > to activatecamera mode. (Additional camera options areavailable through the camera settings page. See“Camera Settings” on page 116 for moreinformation.)2. Using the device’s display screen as a viewfinder,aim the camera lens at your subject.3. Press or tap until the shutter sounds.(Your device automatically saves the picture to theDCIM folder on the microSD card.)Camera Settings1. From camera mode ( ), you can also movethe camera mode slider (right of the screen) to thecamcorder position ( ) (to switch fromcamera to camcorder and record videos).– or –Touch the camera’s side panel and adjust any ofthe following options: Camera settings to access camera hardwaresettings:● Review Mode to change the length of time therecently-taken photo displays onscreen beforereturning to Camera Mode. Choose from:2 seconds or Off.● Brightness to set the value of light that displayswithin the picture color.● Night Mode to select a camera setting forbetter image capture under a darker lightingenvironment.● Picture size to set the size of your image.Choose from: 2M Pixels, 1M Pixels, VGA Pixels,or QVGA.● Picture quality to set the image quality for yourimage. Choose from: Super fine, Fine, orNormal.● Color effect to apply different color effects ontoimages. Choose from: None (default), Mono,Sepia, Negative, or Aqua.● Camera Settings to restore the settings to thedefault parameters. Store location to store the actual location (latitudeand longitude) where the image was taken so thephoto can later be displayed on Google Maps orused in other social applications.M580.book Page 116 Wednesday, September 21, 2011 4:52 PM
