26PC/AV ModeSet PC/AV Mode to AV. The picture size will be enlarged.This option is useful when you view a movie.• Set to PC when connected to a PC.• Set to AV when connected to an AV device.― This function does not support Analog mode.― Supplied for the wide models only such as 16:9 or 16:10.― If the monitor (when set to HDMI) is in power saving mode or is displaying the message Check Signal Cable,press the button to display the On Screen Display (OSD). You can select PC or AV.Key Repeat TimeControl the response rate of a button when the button is pressed.Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only oncewhen a button is pressed.Source DetectionSelect either Auto or Manual as the method to recognize input signal.INFORMATIONView the current input source, frequency and resolution.PICTURECOLORMENU SETTINGSSETUP&RESETINFORMATIONINFORMATIONLS********/**S / N : ***************HDMI**kHz **Hz ******x****Optimal Mode****x**** **Hz― The displayed image may differ depending on the model.