046Functions ( ) SharpnessYou can adjust the sharpness of thepicture you are about to take.You cannot check the sharpness effecton the LCD monitor before you take apicture, because this function is appliedonly when the captured image is storedon the memory. ContrastYou can change the contrast of the image.1. Select [Contrast] by pressing theUp/Down button.2. Change the contrast by pressing theLeft/Right button.3. Press the Shutter button to take animage.1. Select [Sharpness] by pressing the Up/Down button.2. Change the Sharpness by pressing the Left/Right button.3. Press the Shutter button to take an image. SaturationYou can change the saturation of the image.1. Select [Saturation] by pressing theUp/Down button.2. Change the saturation by pressing theLeft/Right button.3. Press the Shutter button to take animage.Image AdjustBack MoveContrastSharpnessSaturationAdjust contrast, sharpness and saturation.Image AdjustBack MoveContrastSharpnessSaturationAdjust contrast, sharpness and saturation.Image AdjustBack MoveContrastSharpnessSaturationAdjust contrast, sharpness and saturation.Image Adjust When Soft or Vivid in photo style is set, saturation is not avail-able. When Negative in photo style is set, contrast is not available. OIS (Optical image Stabilization)This feature allows you to minimize camerashake while taking a picture.Minimize camera shake.OISBack Move OIS function may not work sufficiently in the following cases.- To take pictures of a moving subject.- To take pictures with higher digital zoom values.- When camera shake is beyond the camera-shake correction range.- When the shutter speed is slow.- When the battery is low. If you operate OIS function using a tripod, the image can beblurred by the vibration of the sensor of the OIS. Turn off theOIS function when you use a tripod.● If the camera is subjected to an impact, the LCD monitorcan be affected. To make the camera function properlyagain, turn it on and off.