091Setting up the application software Starting PC mode PDF documents of user manual are included in the SoftwareCD-ROM supplied with this camera. Search the PDF files withWindows explorer. Before opening the PDF files, you mustinstall the Adobe Reader included in the Software CD-ROM.Install Adobe Reader from the CD provided. If the Internet isnot enabled, install Adobe Reader by using the executable filelocated in the CD. To install the Adobe Reader 6.0.1 correctly, Internet Explorer5.01 or later has to be installed. Visit "www.microsoft.com" andupgrade the Internet Explorer.If you connect the USB cable to a USB port on your PC and thenturn on the power, the camera will automatically switch to "computerconnection mode". In this mode, you can download stored images toyour PC through the USB cable. Camera settings for connection1. Turn on the camera.2. Connect the camera and computer with the supplied USBcable.3. Once the camera is turned on, the camera automaticallyrecognizes the computer and is connected to it.Ä If automatic connection fails, set the [USB] menu to [Computer].(p.56)Important information about USB cable usage. If the camera is connected to the PC through a USB hub:connect the camera directly to the PC. If the camera and other devices are connected to the PC at thesame time: remove other device. Camera can not be detected using the front side USB port ofcomputer. In this case, use the back side USB port of computer.