Samsung SCC-C4253 User Manual

Also see for SCC-C4253: Brochure & specs

_ setupsetupDAy/NIGHTYou can specify a recording mode accordingto the scene.Select <CAmERA SET> - <DAy/NIGHT>.Select a screen transition mode accordingto the illumination, and set options asappropriate.DAY : Fixed to DAY mode, regardless ofthe scene.NIGHT : Fixed to NIGHT mode,regardless of the scene.If BURST is set to <ON>, the burst signal will be output along with the black-and-white composite video signal.AUTO : According to the luminance, thiswill switch DAY to NIGHT mode, or viceversa.BURST : If set to <OFF>, the burstsignal will not be output in NIGHT mode.DAYNIGHT BRIGHTNESS : Specifythe brightness level switching fromCOLOR to BW filter.Adjusting from HIGH to LOW will causeto switch the filter in a darker screen.DAYNIGHT DWELL TIME : Timerequired to determine the filter switch.NIGHTDAY BRIGHTNESS : Specify the brightness level switching fromBW to COLOR filter. Adjusting from HIGH to LOW will cause to switch thefilter in a darker screen.NIGHTDAY DWELL TIME : Time required to determine the filter switch.MASK AREA : If there exists a brightspot light source in a night scene, youcan specify the size and position asneeded.This will prevent an error in switchingfilter, or failure to determine the filterswitch in a night scene where a brightspot light source exists.Any excessively bright area in a nightscene will be MASKed.You can specify MASK 1 and 2 simultaneously.1.2.------AUTOBURST OFFDAYNIGHTBRIGHTNESS MIDDWELL TIME 2SECNIGHTDAYBRIGHTNESS MIDDWELL TIME 5SECMASK AREA 1 2MASK AREADAY/NIGHT AUTOWHITE BALFOCUS MODE ONEAFZOOM SPEED [2]DISPLAY ZOOM OFFDIGITAL ZOOM OFFDETAIL [2]V-SYNC (INT)---AGC COLOR SUP MID