Samsung SCC-C6405 Owner's Instructions Manual

Also see for SCC-C6405: Owner's instructions Owner's instructions

6. Do not place conductive objects (e.g., screwdrivers, coins, and metalthings) or containers filled with water on top of the camera. (Doing so maycause personal injury due to fire, electrical shock, or falling objects.)7. Do not install the unit in humid, dusty, or sooty locations.(Doing so may cause fire or electrical shock.)8. If any unusual smells or smoke come from the unit, stop using the product.In such case, immediately disconnect the power source and contact theservice center. (Continued use in such a condition may cause fire orelectrical shock.)9. If this product fails to operate normally, contact the store of purchase oryour nearest service center. Never disassemble or modify this product inany way. (SAMSUNG is not liable for problems caused by unauthorizedmodifications or attempted repair.)10. When cleaning, do not spray water directly onto parts of the product.(Doing so may cause fire or electrical shock.)Wipe the surface with a dry cloth. Never use detergents or chemicalcleaners on the product, as this may result in discoloration of surface orcause damage to the finish.Caution1. Do not drop objects on the product or apply strong shock to it. Keep awayfrom a location subject to excessive vibration or magnetic interference.2. Do not install in a location subject to high temperature (over 122 °F ), lowtemperature (below 14 °F ), or high humidity.(Doing so may cause fire or electrical shock.)3. Avoid a location which is exposed to direct sunlight, or near heat sourcessuch as heaters or radiators.(Neglecting to do so may result in a risk of fire.)4. If you want to relocate the already installed product, be sure to turn off thepower and then move or reinstall it.5. Install in a well-ventilated location.6. Remove the power plug from the outlet when there is a lightning storm.(Neglecting to do so may cause fire or damage to the product.)FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interferencethat may cause undesired operation.Note: This equipment has been tested and found to comply with the limits fora Class A digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercialenvironment. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with theinstruction manual, may cause harmful interference to radiocommunications. Operation of this equipment in a residential area islikely to cause harmful interference in which case the user will berequired to correct the interference at his own expense.