ENGLISHAdvanced Recording6666✤ VIDEO LIGHT works in CAMERA/M.REC mode only.✤ To brighten the scene when natural lighting is too dim.✤ VIDEO LIGHT works in SP mode only.- If you turn on the LIGHT in LP mode, the LIGHT indicator and “LP”will be blinking on the LCD.DANGER The VIDEO LIGHT can become extremely hot.Do not touch it either while in operation or soonafter turning it off, otherwise serious injury mayresult. Do not place the camcorder into the carrying caseimmediately after using the VIDEO LIGHT, since itcan remain extremely hot for some time. Do not use near flammable or explosive materials. It is recommended that you consult your nearestSAMSUNG dealer for bulb replacement.- The life of the bulb is approximately 50 hours.1. Set the camcorder to the CAMERA mode.2. Press the V.LIGHT button. The VIDEO LIGHT indicator appears on the LCD and the light isturned on.3. If you want to turn off the VIDEO LIGHT, press the V.LIGHT buttonagain.Reference The light is turned off automatically during ejecting or inserting. Even if the battery indicator does not blink when the battery packs chargeis low, the camcorder may turn off automatically when you turn on thelight, or when you start recording with light turned on. The built-in light is used as a subsidiary light, it may not be enough foroutdoor lighting. The picture quality may deteriorate if you use the VIDEO LIGHTcontinuously for more than 20 minutes. If you turn on the light in 1/8, 1/15, 1/30 SHUTTER mode, the manualSHUTTER mode will be switched off.Using the VIDEO LIGHTV.LIGHTDISPLAYPBZOOM✤✤✤-1.2. VIDEO LIGHT3.
