9898ENGLISH9898Troubleshooting✤ Before contacting a Samsung authorized service center, perform thefollowing simple checks.They may save you the time and expense of an unnecessary call.Self Diagnosis DisplayMoisture Condensation✤ If the camcorder is brought directly from a cold place to a warmplace, moisture may condense inside the camcorder,on the surface of the tape, or on the lens. In this condition, the tapemay stick to the head drum and be damaged or the unit may notoperate correctly.To prevent possible damage under these circumstances, the camcorderis fitted with a moisture sensor.✤ If there is moisture inside the camcorder, (DEW) is displayed. Ifthis happens, none of the functions except cassette ejection will work.Open the cassette compartment and remove the battery.Leave the camcorder for at least two hours in a dry warm room.slowslownoslowslowslowslowthe battery pack is almost discharged. Change to a charged one.When the remaining time on the tape isabout 2 minutes Prepare a new one.the tape reached its end. Change to a new one.there is no tape in camcorder. Insert a tape.the tape is record protected. If you want to record, release theprotection.moisture condensation has formed in thecamcorder. see below.the camcorder has some mechanical fault. 1. Eject the tape.2. Set to OFF.3. Detach the battery.4. Reattach the battery.* If unresolved contact yourlocal service representative.TAPE END!TAPE END!TAPE!PROTECTION!....DLCRDisplay Blinking Informs that... ActionTroubleshooting✤✤✤1.2.3.4.*TAPE END!TAPE END!TAPE!PROTECTION!.... DLCR.
