ENGLISH5151Advanced Recording DATE/TIME✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes.✤ The date and time are automatically recorded on a special data area of the tape.1. Press the MENU button. The menu list will appear.2. Turn the MENU DIAL to highlight VIEWER and press the ENTER button.3. Turn the MENU DIAL to highlight DATE/TIME.4. Press the ENTER button to select the sub-menu.5. Using the MENU DIAL, select the DATE/TIME mode. You can choose to display - the OFF, DATE, TIME, DATE/TIME- OFF only- DATE only- TIME only- DATE & TIME To return to the previous menu, highlight the DATE/TIME in the middle of the andpress the ENTER button.6. To exit, press the MENU button.Notes The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button. The DATE/TIME will read “- - -” in the following conditions.- During playback of a blank section of a tape.- If the tape was recorded before setting the DATE/TIME in the Camera’s memory.- When the lithium battery becomes weak or dead. Before you can use the DATE/TIME function, you must set the Clock.See CLOCK SET on page 37.CAM MODEVIEWER SETLCD ADJUSTDATE / TIMETV DISPLAYCAM MODEINITIALLCD ADJUSTDATE / TIMETV DISPLAYCAMERAA/VMEMORYVIEWERCAM MODEDATE / TIMEVIEWER SETDATETIMEDATE&TIME
