47Voice Dial46Using Voice DialingPlacing a CallTo place a call using Voice Dialing:1.To place the call, press and hold , or openthe folder, depending on the setting.2.At the voice prompt, say the name into the phone.• If the phone recognizes the name, the phoneattempts a connection.• If the phone does not recognize the name, thescreen prompts for the name again.• If the phone is unable to recognize the nameafter two attempts, the message “CannotRecognize Name. Please check name.” displays.Try the call again later, or check the recordedname.Reviewing Voice Dialing EntriesTo review Voice Dialing entries:1. Press to display the Main Menu.2. Press for Voice Dial.3. Press for Review. A list of entries displays.4. Press the digit key to select the desired entry, orpress the scroll keys to scan entries. The recordednames play audibly as you scroll through the list.5. Press to return to Standby mode.END/2 ABC6 MNOMENUActivationVoice Dialing is always active once you have trainedthe phone to accept Voice Dialing entries. To placecalls using Voice Dialing, simply press and hold ,and then say the name into the phone after you hearthe prompt.You can also initiate a Voice Dialing call just byopening the folder, when you select this optionthrough the Main Menu.To change Voice Dialing setup options:1. Press to display the Main Menu.2. Press for Voice Dial.3. Press for Set Active.4. Press the scroll keys to toggle between options:• [ ] only: Enables Voice Dialing by pressing andholding .• [ ] / Folder: Enables Voice Dialing by pressingand holding , or by openingthe folder.5.When the desired option displays, press tosave the setting.OK /4 GHI6 MNOMENUSCH-811(E-US) 1/20/99 10:35 AM Page 46