6 0 6 1ActivationVoice Dialing is always active once you havetrained the phone to accept Voice Dialing entries.To place calls using Voice Dialing, simply pressand hold , and then say the name into thephone after you hear the prompt.You can also initiate a Voice Dialing call just buyopening the folder, when you select this optionthrough the Main Menu.To change Voice Dialing setup options:1 Press to display the Main Menu.2 Press for Voice Dial.3 Press for Set Active.4 Press the scroll keys to toggle between options:• [*] only: Enables Voice Dialing by pressing andholding .• [*]/Folder: Enables Voice Dialing by pressing andholding , or by opening the folder.5 When the desired option displays, press to savethe setting.Using Voice DialingTo place a call using Voice Dialing:1 To place the call, press and hold , or open thefolder, depending on the setting.2 At the voice prompt, say the name into the phone.• If the phone recognizes the name, the phoneattempts a connection.• If the phone does not recognize the name, thescreen prompts for the name again.• If the phone is unable to recognize the name aftertwo attempts, the message “Cannot RecognizeName. Please check name.” displays. Try the callagain later, or check the recorded name.Placing a CallTo review Voice Dialing entries:1 Press to display the Main Menu.2 Press for Voice Dial.3 Press for Review. A list of entries displays.4 Press the digit key to select the desired entry, orpress the scroll keys to scan entries. The recordednames play audibly as you scroll through the list.5 Press to return to Standby mode.Reviewing Voice Dialing Entries!SCH-850(46~65) 7/16/99 1:21 PM Page 8