116Scanning and Connecting to a Wi-Fi Network1. Turn Wi-Fi on (see “Turning Wi-Fi On” on page 115).Your phone scans for available hotspots and pops-up alist of any it finds.2. To connect to a hotspot, touch it on the pop-up list.• If the Wi-Fi network is open, you will be automaticallyconnected.• If the Wi-Fi network is secured, enter the password at theprompt to connect.Adding a Wi-Fi Network Manually1. From the Home screen, touch Menu ➔ Settings ➔Wi-Fi. The Wi-Fi options screen appears. (For moreinformation, refer to “Accessing Settings” on page128.)2. Touch Wi-Fi to turn on Wi-Fi.3. Touch Add network, then enter the following values:• Network SSID: Enter the name of the WAP (Wireless AccessPoint).• Security: Select the type of security used by the WAP.• Password: If the WAP is secured, enter the password or key.BluetoothNote: For Hearing Aid Compatibility Information, see page 193.Bluetooth is a short-range wireless communicationstechnology for exchanging information over a distance ofabout 30 feet.You don’t need to line up the devices to send informationwith Bluetooth. If the devices are in range, you can exchangeinformation between them, even if they are in differentrooms.Configuring Bluetooth SettingsConfigure your phone’s Bluetooth settings. For moreinformation, see “Bluetooth settings” on page 131.Note: Bluetooth profiles are specifications for servicessupported by individual devices. For a list of profiles yourphone supports, see “Bluetooth profiles” on page 130.
