150LED IndicatorThe LED indicator on the front of the phone displays whenthe phone is locked, to notify you of status changes andevents. Use LED indicator settings to configure how the LEDfunctions.1. From the Settings screen, under Device, touch LEDIndicator. The LED Indicator screen appears.2. Touch the following options to enable or disable them.(When enabled, a check mark appears in the checkbox.):• Charging: When enabled, the LED glows red during charging,and green when the battery is fully charged.• Low battery: When enabled, the LED blinks red to indicate lowbattery charge.• Missed event: When enabled, the LED blinks orange to showthat you have missed calls, new messages, or applicationevents.MotionMotion lets you control a number of your phone’s functionsby moving your hand or finger across the screen in aparticular pattern or by moving the phone itself in a particularway.Note: For more information about using Motion, see “Motions”on page 24.1. From the Settings screen, under Device, touch Motion.The Motion screen appears.2. Touch Motion activation to enable/disable your phone’sability to recognize active gestures. (When this optionis enabled, a check mark appears in the check box.)3. Configure motion options by touching thesetting to enable them, or touching thesetting to disable them:• Direct call: When enabled, you can lift the phone to your earwhile viewing a contact to dial the contact’s phone number.• Smart alert: When enabled, the phone will automatically notifyyou to missed calls and alerts that occurred while the phonewas stationary.
