Bluetooth 113Note: Pairing between two Bluetooth devices is a one-time process. Once apairing has been created, the devices will continue to recognize theirpartnership and exchange information without having to re-enter apasscode again.To disconnect a paired device:Disconnecting a paired device breaks the connection betweenthe device and your phone, but retains the knowledge of thepairing. At a later point when you wish to reconnect the device,there is no need to setup the connection information again.1. Verify your Bluetooth is active.2. From the Bluetooth settings page, tap the previously paireddevice (from the bottom of the page).3. Tap OK to confirm disconnection.Note: Disconnections are manually done but often occur automatically if thepaired device goes out of range of your phone or it is powered off.To delete a paired device (unpair):Deleting a device from your list removes its “connection record”and upon reconnection would require that you re-enter all theprevious pairing information.1. Verify your Bluetooth is active.2. From the Bluetooth settings page, touch and hold thename of the previously paired device (from the bottom ofthe page). This opens the connected device’s menuoptions.3. Tap Disconnect & unpair (from the onscreen contextmenu) to confirm deletion.To access a paired device’s settings:1. Verify your Bluetooth is active.2. From the Bluetooth settings page, touch and hold thename of the previously paired device.3. Tap Options... (from the onscreen context menu) andconfigure the desired options.4. Press to return to the previous page.Sending Contacts via BluetoothDepending on your paired device’s settings and capabilities, youmay be able to send pictures, Contacts information, or otheritems using a Bluetooth connection.SCH-M828UM.book Page 113 Thursday, September 1, 2011 3:43 PM
