101DDiissppllaayy100DDiissppllaayyDual Clock MENU 7-5You can choose two time zones to be displayed whenyou select Dual Clock for the wallpaper image; fordetails, see page 99.To select time zones for the dual clock:1. When Location highlights, press the key.2. Select the time zone for the first clock by pressingthe or key and press the key.3. Select the time zone for the second clock bypressing the or key.4. Press the OK key to confirm the selection.5. To set the DST (Daylight Saving Time), see below.To exit, press the CLR or key.To apply the daylight saving time:1. When Location highlights, press the or key todisplay DST. Press the key.2. Select Yes to use the daylight saving time for thefirst clock. Otherwise, select No.3. Press the key and repeat step 2 for the secondclock.4. Press the OK key to confirm the selection.Backlight MENU 7-3You have several options for setting how the LCDbacklight operates. Remember that backlight usedrains your battery faster.The following options are available:30 seconds: The backlight switches on when youpress a key and switches off 30 seconds after that.Then the display turns off after 30 seconds. If you setthe Power Saving menu (MENU 7-8) to Enable, thedisplay turns off after 30.8 seconds: The backlight switches on when you pressa key and switches off 8 seconds after that. Then thedisplay turns off after 52 seconds. If you set thePower Saving menu (MENU 7-8) to Enable, thedisplay turns off after 52.Banner MENU 7-4This menu allows you to set a banner message to bedisplayed at the bottom of the display in Standbymode.1. If necessary, press the key to delete eachletter of the old banner. Press and hold thekey to clear the display.2. Enter your banner message. For further details abouthow to enter characters, see page 41.3. When you finish entering the message, press theOK key to save the new banner.