Multimedia 157Using S Beam to Share PicturesThis feature (when activated via NFC) allows you to beamlarge files directly to another compatible device that is indirect contact. These files can be larger, such as Videos, HDpictures, and other large files. You can beam images andvideos from your gallery, music files from your music player,and more.1. From the main Settings page, tap Connections tab.2. If not already active, in a single motion touch and slidethe NFC slider to the right to turn it on.3. Tap S Beam and make sure the feature is turned on.4. If not already active, in a single motion touch and slidethe S Beam slider to the right to turn it on.5. On the source device (containing the desired image orvideo), tap (Apps) ➔ (Gallery).6. Locate and tap the selected image to open it in thepreview window.Important! Neither device must be in Lock mode or displayingthe Lock screen. They must both be active andunlocked. It is recommended that the target devicebe on the Home screen.7. Place the two active NFC-enabled devices back to backto begin.Note: If the Touch to beam screen does not appear on thesource device:- Pull them apart- Verify the image is visible in the preview window onthe source device (providing the file)- Place them together again8. From the Touch to beam screen, tap the reduced imagepreview to begin the transfer. After a few seconds(depending on file size) the recipient with then see thetransferred file displayed on their screen.
