Section 12162• Status — Lets you say a single command (“Status”) to checkyour phone's network coverage, signal strength, and battery.Note: Speaking clearly, say the command that you want to use. If, after afew seconds, the device has not recognized a command, it prompts you torepeat the command. If, after a few more seconds, it still has notrecognized a command, it tells you “Sorry, no match found,” and cancelsvoice recognition.Voice Command Tips:• Make sure you wait for the beep before speaking.• Speak clearly at a normal volume, as if you were talking on thephone.Voice MemoYou can use your phone to record voice memos for laterplayback. You can also record the caller on the otherend of the line during a phone conversation.Note: There is limited space for the number and length of recordings.• The maximum number of voice memos is 10.• The maximum length for a single voice memo is 60 seconds.Record a Voice Memo1. In standby mode, press the MENU (left) soft key ( ),then press (for Tools), (for Voice Kit), forVoice Memo, and for Record. The phone prompts,“Please record after the beep.”Tip: In standby mode, press and hold until the phone prompts,“Please say a command.” Say “Voice Memo” into the microphoneto launch Voice Memo.8 tuv 1@ )) 2 abc1@ ))+
