117• On Power Up — The phone locks automatically the next time yourphone is powered ON (The phone stays locked until you enter thelock code.)3. Select the desired setting. You’re returned to the Securitysub-menu.Change LockThe default lock code for your phone is generally the last fourdigits of your phone number. It is advisable to change the defaultlock code to a secret code for security purposes.1. At the Settings menu, select Phone Settings ➔ Security.You’re prompted to enter the lock code.Note: The default lock code is the last four digits of your telephone number.2. Enter the lock code, then select Change Lock. You’reprompted to enter the new lock code.3. Enter the new lock code. You’re prompted to re-enter thenew lock code for verification.4. Enter the new lock code again. Your changes are stored.Note: Your phone does not allow you to view the lock code for obvioussecurity reasons. If you change the lock code, be sure to write down ormemorize the new code.Emergency #Your phone provides the option of storing three emergencynumbers. Each number can be up to 32 digits in length. Allemergency numbers can be manually called at any time, evenwhen your phone is locked or restricted. This can be a usefulfeature for controlling outgoing calls from your phone.Note: Emergency number 911 is hard-coded into your phone. You can dialthis number any time, even when the phone is locked or restricted. Ifyou call 911 an audible tone is heard and an Emergency promptappears in the display for the duration of the call.Important!: Because of various transmission methods, network parameters,and user settings necessary to complete a call from yourwireless phone, a connection cannot always be guaranteed.Therefore, emergency calling may not be available on allwireless networks at all times.Important!: DO NOT depend on this phone as a primary method of calling911 or for any other essential or emergency communications.Remember to always turn your phone on and check for adequatesignal strength before placing a call.Store Emergency Numbers1. At the Settings menu, select Phone Settings ➔ Security.You’re prompted to enter the lock code.