Samsung SCHR570 User Manual

Also see for Messager III: User manual

Contents

Samsung SCHR570 User Manual Manual pdf 47 page image

Voice SVC 44Note: Speaking clearly, say the command that you want to use. If VoiceSignaldoes not recognize a command, it prompts you to repeat thecommand. If VoiceSignal still does not recognized the command, ittells you “Sorry, no match found” and cancels voice recognition.Voice Command Tips• Make sure you wait for the beep before speaking.• Speak clearly at a normal volume, as if you were talking on the phone.Voice Dialing Tips• Wait for the beep before speaking.• Speak clearly at a normal volume.Dialing a Contact Name1. In Standby mode, press and hold or until “Saya command” displays on the screen then say “Call”followed by the Contact’s first and last name. Voice Dialrepeats the name and dials the number.Note: If Voice Dial is unsure of the name spoken a list of up to three namesdisplays and you are prompted with “Did you say?”Say Yes to confirmthe name displayed, No to hear the next name, or use the keypad toselect the correct name from the list.If the recognized name has multiple numbers stored, Voice Dialdisplays the possible choices and prompts with “Whichnumber?”2. Say “Home”, “Work”, or “Mobile”, and Voice Dial dials thespecified number.3. Press to exit VoiceSignal without dialing.Dialing a Number1. In Standby mode, press and hold or until “Saya command” displays on the screen.2. Say “Call” followed by the phone number. Voice Dialrepeats the number and dials it.Note: If Voice Dial is unsure of the name spoken a list of up to three namesdisplays and you are prompted with “Did you say?”Say Yes to confirmthe name displayed, No to hear the next name, or use the keypad toselect the correct name from the list.3. Press to exit VoiceSignal.Voice Settings In Standby mode, press Menu ➔ Tools ➔ Voice SVC ➔Voice Settings.