110• Only adapt digits if you are regularly having problems with digit dialing. Once youadapt, digit dialing will not work as well for other people using your phone. (Youcan always reset digit adaptation to its original state, as described below.)Adapt DigitsTo adapt digit dialing, do the following:1. In standby mode, press the MENU ( ) key, then press (for Tools),(for Voice Kit), and (for Voice Setting), and for DigitDialing. The following options appear in the display:• Adapt Digits• Reset Digits2. Use the navigation keys to highlight Adapt Digits, then press the key.Your phone displays the first digit sequence and “Please say” playsthrough the speaker followed by the four digits appearing in the display.3. Wait for the beep and say the digits using your normal tone of voice. After amoment, the phone plays back the recording and prompts “Did therecording sound ok?”• If the recording was good, say “Yes.”• If you need to re-record, say “No.”If you say “No,” the phone prompts you to pronounce the digits again. Waitfor the beep and then say the digits.Repeat this step until you’re satisfied with the recording.4. After confirming that the recording sounds “ok”, continue the recordingprocess with the next set of digits.5. After 10 sets of digits, “Adaptation complete” plays through the speakerand you are returned to the Setup Digit menu.Reset DigitsTo reset digit dialing to factory default settings, do the following:1. In standby mode, press the MENU ( ) key, then press (for Tools),(for Voice Kit), and (for Voice Setting), and for DigitDialing. The following options appear in the display:• Adapt Digits• Reset Digits2. Use the navigation keys to highlight Reset Digits, then press the key.The phone prompts you to confirm digit rest.OK tuvtuv@ defdef @OKOK tuvtuv@ defdef @OK
