86• Today — Lets you access the Event(s) scheduled for today (for more information,see “Today” on page 104).• Calendar — Lets you access the current scheduling Calendar (for moreinformation, see “Calendar” on page 105).• Contacts — Lets you find a Contact by name and review the Contact’sinformation. (For more information, see “Finding a Contacts Entry” on page 51.)• Status — Shows your phone's Coverage, Signal Strength, and Battery level.Note: Speaking clearly, say the command that you want to use. If VoiceSignal does not recognize acommand, it prompts you to repeat the command. If VoiceSignal still does not recognized thecommand, it tells you “Sorry, no match found” and cancels voice recognition.Voice Command Tips:• Make sure you wait for the beep before speaking.• Speak clearly at a normal volume, as if you were talking on the phone.Voice MemoYou can use your phone to record voice memos for later playback. You can alsorecord the caller on the other end of the line during a phone conversation.Note: There is limited space for the number and length of recordings.• The maximum number of voice memos is 10.• The maximum length for a single voice memo is 60 seconds.Record a Voice Memo1. In standby mode, press the MENU ( ) key, press (for Voice SVC),(for Voice Memo), and for Record. The phone prompts,“Please record after the beep.”Tip: To launch Voice Memo using a voice command — In standby mode, press the key. When thephone prompts, “Say a command.” Say “Voice Memo” into the microphone.2. Wait for the beep, then start speaking. As it is recording the phone displaysa countdown timer that shows the seconds remaining for the recording.• To pause the memo, press the Pause (left) soft key ( ). When a memo ispaused, select Resume to resume recording.3. Press the Stop (right) soft key ( ) once you’re finished recording. TheMemo Review list appears in the display with the newest memohighlighted.OK tuvtuvabc @