Getting Started 9Activating Your Phone2. Insert the smaller end of the Travel Adapter intothe charger/accessory connector at the bottomend of your phone.Important!: You must unplug the adapter before removing the battery fromthe phone during charging to avoid damage.Low battery indicatorThe battery indicator ( ) in the upper-right corner of the display indicates powerlevel. Monitor the battery strength and ensure your battery is adequately charged.• Three bars ( ) indicate a full charge.• An empty battery icon ( ) indicates a near empty battery.• A blinking empty battery icon ( ) and a tone sounding indicate you have two tothree minutes before the battery is too low to operate the phone.If you continue to use your phone without charging its battery, the phone will shutdown.Activating Your PhoneContact your Wireless Carrier and follow their instructions for obtaining service, ifnecessary. We suggest that you read this guide to fully understand the services yourphone supports.Install the BatteryNote: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and traveladapter.Important!: You must fully charge the battery the first time you use your phone, otherwise you coulddamage the battery. A fully discharged battery requires up to 4 hours of charge time.1. Insert the top end of the battery first,matching the gold contacts on the insideof the battery to those on the phone.2. Press lightly on the bottom end of thebattery down into the phone until it slipsinto place.
