36+/- buttonYou can use the +/- button to adjust the values for the ISO, white balance and exposurecompensation.Main menu Sub menu Available camera mode-2.0~0.0~+2.0(0.5EV steps)Exposure compensationISOWHITE BALANCEAUTO, DAYLIGHT, CLOUDY,FLUORESCENT H, FLUORESCENT L,TUNGSTEN, CUSTOM.AUTO, 100, 200, 400Selecting an ISO Sensitivity1. Press the +/- button, and then use the UP and DOWNbuttons to select the ISO icon( ). The ISO menu barwill appear as shown.2. Use the LEFT and RIGHT buttons to select the desiredISO sensitivity value.- AUTO : The camera's sensitivity isautomatically changed by variablessuch as lighting value or subject brightness.- 100, 200, 400 : You can increase the shutter speed while the same amount of light ispresent, by increasing the ISO sensitivity. However, the image may besaturated in high luminance. The higher the ISO value, the higher thecamera’s sensitivity to light is and therefore the greater its capacity totake pictures in dark conditions. However, the noise level in the imagewill increase as the ISO value increases, making the image appearcoarse.3. When you press the +/- button again, the value you set will be saved and ISO setup modewill end.ISO: You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated by ISO numbers.
